The total length of the aeration pipe is around 60 meters, the tube spacing is about 10 meters, and the high and low phase difference does not exceed 10 cm, fixed, 10 to 15 cm from the pool.Compared with the traditional oxygen plane, microporous oxygen is in the water, the motor is on the shore, there is no possibility of leakage in water.

There are two main types of installation.2.2 kW high-performance oxygenated equipment, an effective oxygen surface is 30 to 40 mu. Third, the structural and mounting microporous oxygenation facilities mainly include hosts (electric machines), Roots filling (speed 1400 rpm), gas storage buffer, supervisor (PVC plastic tube), branch (PVC plastic tube or rubber hose) , The aeration tube (microporous nano-exposure) and the like.15 kWh, the disk can be 4 ~ 6 mm diameter steel, the aeration pipe is fixed on the box, and the total length of the disk is 15 ~ 20 meters, 3 to 4 per acre,

The total length is 30 meters,and fixed, 10 to 15 cm from the bottom of the pool. The disc installation method is equipped with a power.The motor does not damage the motor and affecting oxygen by waste. Roots drums are regularly lubricated.It is found that the microporous rupture is changed in time.

The bubbles are sufficiently dissolved in the gas, and the oxygen is fully dissolved in the water, and can also cause the rotation of the water flow and the upper and lower flow, China Long Arm Aerators Manufacturers and the upper and lower flow of the water flow will be in the upper layer, and the flow of the water flow will flow micropores.

After a day, it is tapped, shakes the attachment, or soaked with 20% of the washing powder for 1 hour and then washed, dry and reuse. Since the oxygenation can improve and stabilize the water quality, reduce the generation of stress and other diseases, increase the survival, increase appetite and growth. The production cycle ends, and the warehouse is stored.

امتیاز بدهید :